Da li je ovo "mura effect"

Ovaj deo foruma je namenjen potrošačima, gde mogu postavljati pitanja vezana za korišćenje aparata ili potražiti informaciju o servisnim centrima. Morate biti registrovani da bi mogli pisati u forumu.
HOME -- SERVISERI -- EXPERT-TEAM

Urednici: goranfri,nike

Pravila foruma
Morate biti registrovani da bi pisali u forumu. REGISTRACIJA
U slučaju da želite kontaktirati administratora molimo da to učinite na sledećem linku KONTAKT
Avatar
nike
gxu
gxu
Postovi: 2898
Pridružen: 21 Mar 2010, 11:35
Location: Split HR
Warranty service: Atosa Arisco Ozti Fimar Roller-Grill Systemair Fiocchetti Prismafood Cappone Hendi Omniwash Icetech ItalI-Ice
Contact person: NIKE
Specialty: whitegoods
Lokacija: Split, HR

Da li je ovo "mura effect"

Post napisao nike » 10 Feb 2013, 15:47

Televizor: Philips
model: 37PFL3512D/12 ( 37PFL3512D12 )
serial no: HJ D0813 459317

Dali netko iz slike može potvrditi dali je ovo taj murra efekt i dali postoji, i ako da, koje bi bilo rješenje za taj problem.
murro.jpg
Zadnja izmena: Majstor Duja, dana 11 Feb 2013, 11:09, ukupno menjano 4 puta.
Razlog: ...ispravljen naslov, Kazahstanac ;)
"Blago budalama, njima je lako jer ne misle tako!" PV

Avatar
nike
gxu
gxu
Postovi: 2898
Pridružen: 21 Mar 2010, 11:35
Location: Split HR
Warranty service: Atosa Arisco Ozti Fimar Roller-Grill Systemair Fiocchetti Prismafood Cappone Hendi Omniwash Icetech ItalI-Ice
Contact person: NIKE
Specialty: whitegoods
Lokacija: Split, HR

Re: Dali je ovo "murra efect"

Post napisao nike » 10 Feb 2013, 18:30

Bijela točka je odsjaj blica sa aparata. Problem je u tamnim horizontalnim oblacima.
"Blago budalama, njima je lako jer ne misle tako!" PV

c00l4nt
_
_
Postovi: 53
Pridružen: 19 Nov 2012, 19:20
Location: Podgorica
Warranty service: PHILIPS, LG, PIONEER
Contact person: Boris
Specialty: tv-multimedia
Lokacija: Podgorica

Re: Dali je ovo "murra efect"

Post napisao c00l4nt » 11 Feb 2013, 09:39

To je najcesce od dima cigara, lozenja drva...uglavnom od dima...cistio sam panel jednom za 50 eura...i nikad vise ne bih ni za 500...:)
Rad je stvorio čovjeka, a nerad gospodina...

Avatar
Majstor Duja
Neaktivan
Postovi: 3136
Pridružen: 23 Avg 2006, 17:29
Location: Novi Sad - centar
Warranty service: http://www.elektrocentar.com
Contact person: Goran Duic
Specialty: tv-multimedia

Re: Dali je ovo "murra efect"

Post napisao Majstor Duja » 11 Feb 2013, 11:06

nike je napisao:Dali netko iz slike može potvrditi dali je ovo taj murra efekt i dali postoji, i ako da, koje bi bilo rješenje za taj problem.
Moze biti a i ne mora...zavisi koliko je uredjaj star i u kakvim je uslovima radio, procitaj dalje:
c00l4nt je napisao:To je najcesce od dima cigara, lozenja drva...
Ne bas uvek, ali ima istine i u tome - desi se da se mikroprasina natalozi na i izmedju disperzionih plasticnih filtera koji se vremenom polarizuju... ali problem je najveci kad se stakla koja cine sendvic displeja krenu razdvajati od toplote i loseg kvaliteta lepila (tip 3)...displeji se klasifikuju od A+ do B- u toku iste proizvodnje tako da gledajte da imate srece kad kupujete jedan B- klase (uglavnom su najjeftiniji)...
Mi, na Balkanu taj nedostatak na displeju zovemo strucno "mrlje na ekranu" lolzi

Vise o tome:

Kod: Označi sve

http://www.behardware.com/articles/589-1/panels-a-carte-mura-components-dead-pixels.html
Mura Effect type 1 corresponds to a lack of homogeneity in control circuit adjustments. From one cell to another color control can change and it will lead to permanent defects in intensity in displayed images.

Mura Effect type 2, or Cell Gap Mura comes in two forms. If liquid crystal cell sizes are superior to the normal size in an area of the panel, the images produced in this area will be brighter. This is a White Mura. In the opposite way, if the cell size is too small, it will be darker. This is a Black Mura. Cell distortions sometimes come from a « normal » defect in manufacturing, but most of the times are due to an impurity in the panel such as dust, a drop of some chemical or an accidental ionisation of liquid crystals, which then misalign. For the first two cases, it is possible to move the defect by gently pressing the panel with your fingers to move the Mura to the side from a useful area in the screen. In the case of ionisation, the defect can fade or even disappear with time. For us it was the opposite with the appearance of a Mura on two monitors after a few years of use (three and five years, respectively). It looks as if you were pushing on the screen with your fingers except now it´s permanent.

Mura Effect type 3 is related to distance or defects between the panel and liquid crystals. This occurs when the panel is sealed and side pressure is imperfect. If it´s too strong, cells are crushed and there is a bright halo in a corner along the panel.

These are the three types of Mura effects detected in the factory. Two others exist:
One Murat effect can appear when color filters (red, green and blue) placed on cells are made of different materials, which react differently to heat and light,
the next one can be included as a manufacturing Mura, even if it isn’t one. The “spot” is a mark on the backlighting itself. It doesn’t properly light up an area of the monitor and causes a small spot of 1 to 5 mm in diameter.
Rule #1 "Always stand for what you believe, even if it means standing alone."

mexx25
_
_
Postovi: 9
Pridružen: 11 Feb 2013, 14:05
Location: Zenica
Specialty: tv

Re: Dali je ovo "murra efect"

Post napisao mexx25 » 26 Feb 2013, 20:00

c00l4nt je napisao:To je najcesce od dima cigara, lozenja drva...uglavnom od dima...cistio sam panel jednom za 50 eura...i nikad vise ne bih ni za 500...:)
ja sam jedom pokuso i nije uspjelo, a sa cime ste cistili vi. imam još jedan samsung odavno stoji a neznam da li bi pokusavo zbog proščog neuspjeha

c00l4nt
_
_
Postovi: 53
Pridružen: 19 Nov 2012, 19:20
Location: Podgorica
Warranty service: PHILIPS, LG, PIONEER
Contact person: Boris
Specialty: tv-multimedia
Lokacija: Podgorica

Re: Da li je ovo "mura effect"

Post napisao c00l4nt » 28 Feb 2013, 09:55

FAIRY-jem...samo se zajebano suse...ali working brate... :mrgreen:
Rad je stvorio čovjeka, a nerad gospodina...

mexx25
_
_
Postovi: 9
Pridružen: 11 Feb 2013, 14:05
Location: Zenica
Specialty: tv

Re: Da li je ovo "mura effect"

Post napisao mexx25 » 01 Mar 2013, 13:02

Ima da pokušam ako uspije ćastim :)

Avatar
nike
gxu
gxu
Postovi: 2898
Pridružen: 21 Mar 2010, 11:35
Location: Split HR
Warranty service: Atosa Arisco Ozti Fimar Roller-Grill Systemair Fiocchetti Prismafood Cappone Hendi Omniwash Icetech ItalI-Ice
Contact person: NIKE
Specialty: whitegoods
Lokacija: Split, HR

Re: Da li je ovo "mura effect"

Post napisao nike » 11 Mar 2013, 23:24

Samo da izvjestim, pošto nema jednostavnog rješenja, prijatelj, čiji je tv, odlučio je da nabavi novi.
"Blago budalama, njima je lako jer ne misle tako!" PV

Odgovori

Natrag na “POMOĆ KRAJNJIM KORISNICIMA APARATA”